Product introduction:
The product is developed based on high solid content epoxy DC plane coating is also a two-component floor paint, there are A component (colour paint) and B component (curing agent) two parts of the thick slurry coatings, high solid content, good abrasion resistance, hardness, paint film fullness is good, good flow and spreading, conductivity is excellent, permanent anti-static. The antistatic value of surface resistance and volume resistance can reach 1*104-1*109.
Application:
(1) Before use, the A component (paint) should be fully stirred with an explosion-proof mixer, and high-speed mixing of 1-3 minutes is suitable for the A component (paint) due to the long storage time and precipitation must be stirred after use.
(2) A component (colour paint) and B component (curing agent) by the proportion of the package label prompts the use of a standard measuring device weighing to ensure its accuracy after mixing, can not be arbitrarily mixed, so as not to affect the curing effect of the material.
(3) For The mixed AB components, be sure to mix high-speed mixing, generally mixing 2-3 minutes. Mixed materials in the construction of the temperature above 25 ℃, within 20 minutes to use up the best. The shorter the storage time, the better the effect.
(4) will mix the mixed material poured on the pre-construction ground, with a professional scraper evenly scraped, in the process of just scraping there will be traces of the scraper, but after 20 minutes the traces will naturally disappear, forming a flat without trace!
Precautions:
(1) This product belongs to flammable chemicals, please keep it away from fire, The mixer uses an explosion-proof motor.
(2) The product is stored in a cool and ventilated place, and should not be exposed to the sun.
(3) The temperature of the product should not be lower than 5 ℃ construction, the temperature is too low to affect the curing time. Humidity should not exceed 70% is appropriate, The humidity is too large paint film surface will appear whitened and uneven colour.
(4) the use of low temperatures, the viscosity of the material, if large, can be mixed according to the total amount of AB 1-2% of the addition of special thinner to use.
(5) Construction process inadvertently material splash in the eyes should be promptly flushed with water, and promptly sent to the hospital for treatment.
